A Quick Guide to Screen Printing

In addition to t-shirts, screen printing is also useful for a variety of other materials and garments, such as bed sheets, tea towels, tote bags, and socks. The wide variety of finishes possible with screen printing means that it can be used to create designs on millions of products. Whether you are a newbie or an experienced screen printer, there are several steps you need to follow. Learn more about screen printing with this quick guide.

After using the screen, it must be cleaned thoroughly to remove all traces of emulsion. Large paintwork may use large tubs of acid or cleaning fluid to clean screens. Home-based printers may use a power hose or a sink and water trough. Screen printing has a long history and a high learning curve, so take your time with the process. Then you can use it to create the design of your dreams.

Next, you’ll need a stencil. To create a stencil, you simply block off portions of the screen with an image of the design you want to create. These spaces will be where the ink will appear on the substrate. When the stencil is ready, the screen can be exposed under a UV light source in the 350-420 nanometer range. The ink will adhere to the stencil as it dries. Afterwards, it’s time to start printing!

When choosing an ink, consider the type of fabric you’re using. Cotton is the best natural fabric to screen print on. Make sure it’s 100 percent cotton, preferably organic, and the highest percentage you can afford. Basic cotton is the traditional choice for screen printing and is relatively cheap. Ringspun cotton is of higher quality and softer to the touch. It’s also more expensive. If you’re starting a print shop, basic cotton might be your best bet.

Once you’ve decided to proceed with screen printing, you’ll need a flat surface. To screen print, lay a mesh screen over the surface. Then pour ink or paint onto the screen. Then, use a squeegee or roller to push the ink through the mesh. Repeat the process to make new garments. After the second printing, rinse the screen to remove the emulsion. A special wash fluid will remove any excess ink. After this, you can reuse the mesh as a stencil.

Another tool required for screen printing is the squeegee, a rubber blade that pushing ink through the mesh screen. Squeegees come in different sizes and can be found at Lawson Screen Supply. A firmer rubber blade is better for intricate designs and stencils because it helps spread the ink evenly across the stencil. Softer blades are best for less-detailed designs and printing on fabric. And don’t forget to buy a good screen and squeegee set. To learn more about screen printing visit Orlando printing and embroidery company at https://www.orlandoembroideryandprinting.com/.